How To Use Soda Api For WCs That Are Consuming

How to use cayeb for wc (Racool_studio-Freepic image)

YOGYAKARTA - One of the big problems at home is clogged toilets, which cause unpleasant odors and discomfort. Soda fire, or sodium hydroxide (NaOH), is a chemical that is often used to clean clogged waterways, such as wc. However, because of its strong corrosive nature, the use of fire soda must be done carefully to avoid injury or pipe damage. In this article, we will regulate safe and efficient steps for how to use cayeb soda for wc.

What Is Soda Api?

Sodapi or sodium hydroxide (NaOH) is a chemical compound in the form of debris, pellets, or white powder. This material is corrosive and can react with various organic or inorganic substances. Because it is able to dissolve dirt, fat, and other organic materials, fire soda is often used as a cleaner to deal with clogged water channels.

Attention Before Using Soda Api

Saat sebelum memulai, sangat penting untuk memahami kalau soda api merupakan bahan yang sangat kuat dan berisiko. Berikut merupakan beberapa langkah keamanan yang perlu diperhatikan:

The following are steps that can be followed to use fire soda in cleaning clogged toilets:

Before pouring the fire soda, make sure the water in the toilet is not full. If there is a lot of water, use a dipper or suction equipment to remove some of the water. Leave a little water at the bottom of the toilet so that the fire soda can react properly.

Pour fire soda into a bucket made of plastic or stainless steel. Don't use a bucket made of metal that is easily rusty, because the fire soda can damage it. The size of the required fire soda depends on how severe the blockage in the toilet is. Generally, you need about 200-500 gr soda of fire.

After that, add cold water slowly into the bucket. Don't use hot water, because the fire soda can react very quickly and at risk when mixed with hot water. Stir this solution with plastic sticks or wood until the fire soda dissolves perfectly. When this process takes place, the solution will heat up, this is natural because of the reactive nature of the fire soda.

After the solution is ready, pour it slowly into the toilet hole. Make sure you pour it carefully and avoid splashes. Let the solution work for 15-30 minutes. Soda api will react with dirt that closes the toilet channel, a kind of tissue, fat, or other organic waste, and dissolves it.

After waiting approximately 30 minutes, the toilet flush uses hot water. Hot water will help encourage the remaining dirt that has been decomposed by cassava. Don't use boiling water because temperatures that are too high can damage the pipe, especially if made from PVC. Just use hot water with temperature to make hot drinks.

After pouring hot water, check whether the flow of the toilet is easy. If the blockage is still there, repeat this process once again. However, if the toilet is still clogged after several attempts, there may be more serious problems and professional action is needed.

Additional Tips

In addition, you also need to know how to Clean Watered Glass with Chemicals in the Household, Practically & not Complicated!

So after knowing how to use fire soda for wc, see other interesting news on VOI.ID, it's time to revolutionize news!