5 Tips For Caring For IPhone Charger For Long Life

ILLUSTRATION / Steve Johnson (Unsplash)

JAKARTA - When your cellphone is running low on battery, of course you will immediately look for my charging cable along with the adapter or charger.

However, it should be noted that these devices are also quite valuable items. Because if there is no cellphone charger it will not be full of power.

Therefore, you need to take care of the charger so that it doesn't break quickly, especially for those of you who are users of Apple products, namely the iPhone.

Because in addition to the relatively expensive cellphones, the price of the original accessories is also not cheap. When an accessory is damaged, you have to spend deep enough just for a charger.

Chargers can also be easily damaged when stored or used inappropriately. For that, here are tips on caring for an iPhone charger to keep it durable.

1. Be careful when rewinding the cable

Most users rarely pay attention to this, even though incorrectly coiling the charging cable also has the potential to damage it.

So, it is advisable to be careful when winding it, because otherwise you could damage the delicate wires inside the cable.

The solution is to gently roll it up gently, loop the cord three or four times, then tuck each end into the loop. Do not bend or compress the cable.

One of the most common causes of cable breakage, is being squashed and bent by pressure. When the plug connector meets the cable, this is most likely to cause the cable to break.

2. Slowly Disconnect the Cables from iPhone

Usually they are in a rush to leave but are charging, iPhone users carelessly unplug the charger cable, even removing it roughly.

This shouldn't be a habit, plugging in and unplugging the charger by pulling roughly is a quick way to damage your cable.

3. Use a Shield

This one method is quite the right choice if you want to be more secure, try installing a spring on the end of your charger cable so it doesn't bend easily.

Apart from that, you can also try the cable protector. It looks like a threaded telepine cable and you just need to plug it into the iPhone charger cable.

Not only protects, colorful cable protectors can also make cables more beautiful and attractive. The advantage is, of course, if you use this cable protector, besides protecting it, you can also remove it easily. No annoying glue or adhesive.

4. Unplug the cable from the power outlet when not in use

Usually if we are lazy after charging the iPhone battery, we leave the charger plugged into the electricity. Actually, it is not very good for the durability of your iPhone charger cable and adapter.

Try and make it a habit that after charging your iPhone, immediately unplug the charger from the power socket, so that the charger cable is not damaged quickly.

5. Have More Than One Charger

A common problem that is often the cause of damage to the iPhone charger cable is because the charger cable is often carried everywhere.

It is also often found that the charger cable is connected to the power bank when traveling, while the same cable is also often connected to the adapter if you are in the house. That is not very good for your iPhone charging cable.

It is recommended that you have more than one charger cable if you want to use it when traveling. This is to extend the life of your charger.