It Turns Out That This Is The Cause Of The Matik Motorcycle Gas Pull Starting To Be Heavy

JAKARTA - Pulling automatic motorcycle gas is starting to get heavy or the term 'tight' is certainly very annoying, isn't it? Especially for those of you who do the routine every day using the iron horse.

It turns out that the problems above can be caused by many things. Including there is a problem with the motorcycle injector. In fact, the injector needs to be cleaned up with the recommended distance range.

"One of the factors for pulling the motorbike is because there is a problem in the injector, for that it must be cleaned every 10 thousand kilometers," said Budiman, as the Service Advisor for Yamaha Harapan Motor Beji, to VOI, Friday, October 20.

As is well known, the motor injector's function is to spray fuel into the fuel chamber, by turning particles into fog. When it gets dirty, it will certainly cause problems.

In addition to injectors, heavy motor drag can also be due to problems with the Throttle Position Sensor (TPS). Because this one component has a very important role.

"If the initial gas drag is normal, and when you are invited to walk, start to listen, there could be a problem with the TPS, but it must be checked first," he added.

According to him, there are other factors that can also be the culprit, including the fuel pump component. Because these components distribute gasoline according to their portion to the injector.

Jadi, banyak penyebab tarik gas berat atau ngeden, untuk memastikan masalah bisa langsung menuju ke pabrik resmi.