The Reason for Ban Tubeless Often Flat Even Though It's Still Thick

Illustration of tubeless tires (Pixabay)

YOGYAKARTA - Tubeless tires are chosen because they are considered more resistant to punctures than conventional tires. However, in some conditions, this type of tire is actually problematic. If that happens, know that the cause of tubeless tires often being flat can be caused by many things ranging from age, problems in the rim, and much more. To know more clearly, see the following article.

The Causes of Ban Tubeless Often Flat

Here are the reasons why tubeless tires on vehicles often deflate even though the tread pattern is still visible.

Old stock tires

Basically, a vehicle tire that is properly stored will not trigger problems when used, even though the production year is more than 3 years. However, storing new tubeless tires in any place will make the quality of the material decrease. This can trigger kempess even though the tire looks new.

Loose or detached pin

The valve or valve on the tubeless tire that is problematic can be a hole for the wind to come out. This part can be loose or even ripped off. The trigger is diverse, for example, poor quality valves, important keys are loose, and other causes. When you find a flat tire, try to check if the valve is loose. If so, you just tighten it and pump it back.

Damage to the rim

Tubeless tires and rims are interrelated. The rim of the tire rim serves as a lock so that the wind does not come out. If the rim is bent, or there is wear on the rim, then the tire will often be flat. Usually this condition occurs after the vehicle passes through a road hole hard. The rim of the rim can also leave a gap if it is dirty.

Thin and worn tires

Pay close attention to whether the tire is thin and worn? Because this condition can trigger tubeless tires to often deflate. It must be known that wear on the tire can only be one side due to problems with the body or tire installation. If this happens, make sure the tire is installed straight so that it is thin and worn evenly. Make sure you also replace tires that are no longer suitable.

Bocor alus

A puncture is a condition where the tire is stabbed with a sharp object but the size is so small that the eye is difficult to detect. This condition occurs because of nails, needles, pebbles, wires, or other objects. To detect a puncture, you need soapy water and then spray it all over the tire surface. If there are air bubbles, it is certain that the part is leaking.

The patch is not perfect.

The patch on the tubeless tire that is less perfect will leave an air hole. Currently it is normal if the tire is often flat. It is very important to ensure that the patch results are really tight and strong. In addition, make sure the way to patch the tubeless tire is done correctly.

Those are some of the causes of tubeless tires often flat. Visit VOI.id for other interesting information.