YOGYAKARTA - One of the important components in a motorized vehicle is a battery. How to repair dry batteries that cannot store stun, of course, it is necessary to know all vehicle owners. So how to fix it?
In the Basic Book of the Ship Electricity System, Andy Wahyu Hermanto explains that a battery or accumulator is a source of direct electricity (DC) that converts chemical energy into a form of electrical energy.
In vehicles, aki functions important to turn on the engine, to supply electricity to the lights and vehicle dashboards. If there is a problem with the battery, then the vehicle cannot function optimally.
One of the problems that often occur is that you can't save the stun. So how to fix it? Check out the following information.
Basically, the battery is divided into wet batteries and dry batteries. Wet batteries take advantage of water-based electrolytes. This traditional type of battery requires regular maintenance, such as regular inspection and filling of battery water.
As for dry batteries, they have used gel-based technology, so the electrolytes are trapped in certain compartments. Compared to wet batteries, this type of battery is more practical because it does not require routine maintenance (maintenance free).
However, if not treated regularly, dry batteries can experience a number of problems. The most common problem is not being able to store the stun.
One of the reasons why the battery cannot store the stun is that the age of use is too long. The battery that cannot store the stun can also be caused because the dynamo ampere is damaged due to the overload.
Damage to this component will automatically cause other battery elements to be damaged.
SEE ALSO:
Reporting from various sources, below are several ways to repair dry batteries that cannot store stuns.
The first step to fix dry batteries that cannot store stun is to cut off the electricity circuit. You do this by removing positive and negative cables sequentially.
After the cable is removed, remove the dry battery from the box. Next, open the battery cover including the rubber cover. You can cut the edge of the seal until it is loose and slightly loose.
The next process is by filling the battery with water. Use a pipet to facilitate the process. Make sure the amount of water filled is appropriate to overflow. Next to facilitate the process, re-install the battery cover properly and tightly.
To connect the electricity, install positive and negative cables on the battery. Do it carefully to avoid short circuits.
You can restart the vehicle engine. Make sure the engine RPM stationary is not below 600 RPM. If the RPM is above 600, then the dry battery will be repaired successfully.
That's a review of how to fix dry batteries that can't store stuns. Hopefully useful. Visit VOI.id to get other interesting information.
The English, Chinese, Japanese, Arabic, and French versions are automatically generated by the AI. So there may still be inaccuracies in translating, please always see Indonesian as our main language. (system supported by DigitalSiber.id)
