How To Overcome Damage To Hubs And Switches

Illustration of hub and switch networks (Unsplash)

YOGYAKARTA How to deal with damage to hubs and switches is actually easy, but first it must be known the cause of the damage first. This article will try to provide an overview of how to repair damaged hubs and switches that have an impact on the computer network.

For those of you who take part in the Computer Network, you certainly know the hub and switch. Both are important in an LAN network. Although it is important that both of them are at risk of being damaged. To anticipate the damage, knowing how to repair a damaged hub and switch will be quite helpful.

Damage to hubs and switches is one of the possible risks that may occur in LAN networks. When LAN is damaged, network administrators must immediately find out the cause of network disruption. One of the potential causes of LAN disturbances is damage to hubs and switches.

Troubled hubs and switches will make all customer computers unable to work. Access to information originating from the server computer also cannot be done.

Damage to hubs can be seen from the power indicator lights and indicator lights in each workstation. If the power hub or switch indicator is not turned off, it is possible that the software is damaged because the indicator is a marker of whether the workstation computer is active or off due to interference.

What needs to be done when encountering hubs and switching off is to check whether the two devices are in a damaged condition or due to interference. If the hub and switch are interrupted in the sense that improvements can still be made to both devices, then you can take them to the service area.

However, if the hub and switch are damaged and cannot be corrected, they must be replaced with a new one. Try to choose the best quality hub and switch to minimize damage in the future. Here are some examples of disturbances or damage in the hub and switch section.

Di switch sendiri kerap terjadi masalah yang menyebabkan masalah di jaringan komputer. Berikut ini beberapa masalah yang bisa saja terjadi.

This condition is caused by a short link in the data cable, or it could be due to an unquality cable connector.

Switches can be hanging because data traffic is very high and occurs constantly. As a result, current leakage can occur.

The feature failure on the switch can occur even without knowing the cause.

It is also recommended to find out the differences in hubs and switches so that the damage identification process can be carried out easily.

Those are some ways to deal with damage to hubs and switches. Visit VOI.id to get more interesting information.