Listrk Token Number Fails To Input: Panic Gausah, Do Some Of These Ways

Listrk Token Number Fails Input (Between)

YOGYAKARTA - The problem that PLN Prepaid customers often feel is that they fail when filling out electricity tokens. Of course, this matter often makes you annoyed because electricity cannot be used which causes a lot of activities to be hampered.

However, you don't need to worry because in this post you will get a method of tackling failure to input electricity tokens and their causes.

This is part of the trigger for the failure to input the Electricity Token; Salah entered the ID meter when he bought an electric token.

This often happens. This is what often occurs and causes the electricity token to fail to be inputted. ID meter is not easy to remember because the number is large and the numbers are difficult to memorize. don't listen to it if we buy a cellphone no. So make sure you often record your meter ID number. It can be written on paper or typed on your cellphone.

KwH Over Limit

KwH Over Limit is the maximum limit in purchasing electricity tokens according to the energy used. The failure of the electricity token to fail to be input can take place because the KwH used has exceeded its limits so that the quota cannot be added.

PLN Server Again error

The error of a server is a common matter. If this matter takes place, you just have to wait until the server repair from PLN ends. You can access data about this on Twitter's PLN@pln_id.

Errors When Installing Electricity Installation

If an error occurs when installing an electrical installation, so that what takes place is not only a failure in the input token but also a risk for an electrical short to take place. The fire can be caused by this electrical short circuit. If you feel that if the failure to enter the token is caused by an error in the electrical installation, then you must immediately contact the nearest PLN.

Methods To Overcome Failed Electric Tokens

Recognizing the causes alone is not enough, you must also know the method of tackling electric tokens that fail continuously at the time of input. There are some methods that you can take to overcome these input failed electricity tokens, including:

Call the nearest PLN

This is a very fast method that you can try. You can go to PLN via contact center 123 or directly arrive at the nearest PLN.

Reset the electric meter

The next method is if there is an error in the electrical meter, you can carry out steps to reset the electric meter. Stages for carrying out the reset of the electrical meter, namely the following:

1. Turn off all electronic devices

2. Remove all power lines

3. Wait 15 minutes then turn it back on

4. Enter the meter code reset, namely 00

Methods To Avoid Failure In Electricity Token Input

So that the failure to input electricity tokens does not take place again, you can take anticipatory steps as follows:

Pastikan untuk mencatat ID meter terlebih dahulu dengan detail sebelum membeli token listrik. Kamu bisa mencatat dihandphone maupun di catatan lainnya.

Check KwhOver Limit again.Make sure you buy tokens that don't exceed the KwH limits available.

Check the installation of electrical installations. If an irregularity is found in the electrical installation, immediately contact PLN so that it can be immediately resolved.

So after learning that the listrk token number failed to input, see other interesting news on VOI, it's time to revolutionize news!