How to Patch a Tubeless Tire That Needs to Be Known

YOGYAKARTA - Tubeless tires are a type of tire that does not have a tube or inner tire. This construction makes tubeless tires more immune to the risk of leakage. However, what needs to be remembered, minimal risk does not mean that the tire cannot leak at all. So, how do you patch a tubeless tire on a car? Check out the review below.

The most common cause of a tubeless tire leak is because the tire bead is loose. The loose bead component will make the air in the tire easier to come out. If this is left, the air pressure in the tire will never be right. Well, to deal with this, you can listen to how to patch a car tubeless tire that is leaking below.

This method is the safest method for patching a tubeless tire that is leaking. The trick is to patch the leaking area from the inside of the tire. First, separate the tire from the rim. The next step, for maximum patching, clean the area that is leaking. If so, you can continue to the next step.

You can stick a rubber patch on the surface of the tire that is leaking. Put the rubber patch on the inside of the tire, not the outside. After that, press the rubber patch to stick perfectly to the tire surface using a hot press. Let it harden (about 10-20 minutes). When the tire is perfectly dry, you can use it again.

The way to patch a tubeless tire can also be done with the string method. Like the tip top method, this method is also often used. However, the string method requires high accuracy because it risks damaging the tire surface.

To apply this string method, you need a tire repair kit. The way is very easy. The first step to do is to find the leak point. Next, puncture the leaking area.

Once the leaking part is open, you can immediately apply the patching process. Take a special rubber from the repair kit, then slip it into the hole using a hook tool to about 2 cm. Make sure that some of the rubber is still outside and does not go in completely. Let the rubber dry first, then cut off the rest of the protruding part.

English:

The bullet method is the same as the string method. The difference lies only in the rubber material that is used to patch. In the string method, the rubber used is long like a worm. As for this bullet method, the patch rubber has the shape of a bullet with one end being pointed.

The steps are also like the string method. However, what needs to be remembered, the way to patch a tubeless tire with this bullet method is only suitable for applying to the tire tread area. If you apply it to a hole in the tire wall, the results will be less optimal.

You can use anti-leaking liquid as a way to patch a tubeless tire. This method is the easiest way because the stages are not too complicated. First, find out the cause of the tire leak. Clean the tire surface until there is no dirt left.

The next step, put anti-leaking liquid into the tire filling hole. This liquid can be said to be a "magic substance" that works to adjust the conditions inside the tubeless tire. When a hole appears on the tire surface, the liquid will automatically fill it.

As with the tip top method, patching with the umbrella method is also done from the inside of the tire. Each step that must be followed is the same. The difference lies only in the equipment used.

In the umbrella method, the rubber used as a patch has a shape like an umbrella handle. Interestingly, this method also uses a special clip that is attached to the patch. Its function is to ensure that the rubber patch is tightly attached to the surface of the tire that is leaking.

These methods are practical, but it is best to only use this anti-leaking liquid in emergencies. In addition to the patch results not lasting long, the compounds in it can also damage the tire rim components. If left alone, the rims will rust faster and even wear out.

That's the review of how to patch a tubeless tire that can be done. Hopefully useful. Visit VOI.id for other interesting information.