Don't Rush To Change, Here Are 3 Ways To Fix TV REMots That Don't Respond

YOGYAKARTA - Annoyed with the television remote (TV) who suddenly didn't want to respond? Calm down, is there a way to fix the TV remote that doesn't respond and this problem can be handled alone at home.

This article will guide you step by step to fix the problematic remote TV, so you can enjoy your favorite shows again comfortably.

Reporting from Sony Asia's page, before you try to fix the TV, it is advisable to try resetting the remote control, here's how:

How to unclose the battery compartment will vary, depending on the type of remote control. For details, take a look at your TV manual.

Then on the remote, press the Power button for three seconds, reinsert the battery, make sure the battery is inserted with the correct polarity (/+), then see if the problem has been resolved.

If the problem is not resolved, re-release the battery and leave it for about 1 minute. Then, re-enter the battery.

If the problem is solved, the remote control may stop working temporarily due to poor battery contacts or static electricity. If the problem continues. Here are some things you need to do.

If the TV button can be operated, proceed to the STEP 3.

Check whether the lights (power light / light) at the front / bottom of the TV are on. If the light is on or flashes red, go to the next step.

If the lights are not on, check whether the power cable or AC adapter is not cut off or loose.

However, if the problem is caused by external factors, it can be fixed by resetting the TV. First, remove all connected devices (external USB disk hard, HDMI connection device, etc.) and cables from the TV terminal to ensure there is no influence from this device.

Check the remote control function after completing each step, and make sure there are no remote buttons stuck or stuck. Then navigate the remote control to the remote control sensor located at the front of the TV.

If it is still not working, change the battery or recharge the remote control provided if you have a recharge battery. When changing the battery, clean the remote control terminal with a little alcohol and cloth solution using a cotton or soft cloth.

Notes:

On infrared remote control (IR), although there are two different communication systems (infrared/nirables) for remote control, most remote control TVs are infrared remote control (IR).

If only the Microphone button doesn't work on the remote control TV, check Voice Commands don't work on my Remote.

If you have finished all the steps and the problem is not resolved, please contact the TV guarantee service to get further support.