How To Poles The Right Car So That The Car Continues To Embezzle And Not As Fast As Steam

YOGYAKARTA The correct car pole method is important to know, especially for automotive fans. This is because the wrong processing actually makes the car dull quickly. The molecule itself can be done independently at home so there is no need to bring the vehicle to a repair shop or car pole service provider.

In general, car poles are car paint maintenance techniques that aim to keep the appearance clean untreated and stay smooth without scratches. That way the appearance will resemble a new car. Car poses are done with various techniques, the simplest thing is to use water and soap.

However, sometimes car poles are not enough to only use water and soap, special tools and treatment are needed so that car paints are clean again without stains or scratches.

Unfortunately, the car pole method actually damages paint and makes it look worse. To avoid this, you know the right and right car pole method, which is as follows.

The simplest car paint monetization is manually, namely the use of hands. This method is mostly done by car owners because in addition to being easy to do, the results of the pole can be done as often as possible without additional large costs.

However, manual car paint smoothing is quite time-consuming because it only uses hands with a lap or other simple tools as a tool. In addition, manual smoothing sometimes looks less evenly so that the results obtained are not optimal.

Although there is a potential for polesan results to be less than optimal, if done properly the results are quite satisfying. For those of you who want to try it, take the following steps.

Pertama siapkan alat dan bahan yang dibutuhkan dalam pemberian mobil secara manual yakni soft muff pad, lap microfiber, cadir compound, polysh, dan juga wax.

Once the tool is available, the first step is to wash the entire exterior of the car with clean water and soap. After that dry the car using a microfiber lap.

After cleaning and dry, take the car to the shade and minimal dust. Also make sure the car's body is not too hot either because of the temperature and weather or because the engine is hot.

The first stage of the car pole is to use a compound. Drop the compound to the soft bubble pad 1 to 3 points per panel of the car. After that, compact compactage is evenly applied per panel of the car. Avoid sweeping the compound by jumping. Infiltration can be done as of 50x50cm. After that move to the area next to it. It should be noted that the compound fluid serves to smooth out, cover the fine strokes, and brighten the dull paint.

Setelah dirasa semua, tunggu kurang lebih 5 menit. Jika sudah bersihkan sissi residue dengan lap microfiber.

After that, do a second stage pole with polysh liquid which functions to make the paint color more glossy. Molecular with less polysh liquid with a compound, which is one drop per body panel.

After smoothing the polysh liquid, apply the wax also on the body of the car by applying the wax on the soft buffer pad to a sufficient level. After that, all the body of the car with a microfiber lap to clean the rest of the wax.

Car poses with engines are indeed more practical, easy, and the results can be very encouraging. Unfortunately, smoothing in this way has a greater risk than manual poles, namely car paint that has the potential to be further damaged due to engine friction.

The tools needed when poleping a car with an engine are a car pole and a pole engine. The way to do this is to make sure to stick the poles machine evenly and not tilted.

Also choose the right police foam. There are two types of pole foam that can be chosen, namely rough and smooth. Avoid gluing with the engine for too long only at one point because it will damage car paint.

That's information regarding the right car pole method. Visit VOI.ID to get other interesting information.