YOGYAKARTA - Know how to deal with HP speakers getting into the water so that there is no more severe damage. The reason is, water is able to damage other components that are on the cellphone easily, especially when the water that enters the cellphone is not immediately removed.
The speaker itself is an outage hardware whose function is to emit audio or sound generated from the processing of the cellphone CPU. When the kicker enters the water, the sound issued is disrupted and the results are also not optimal.
Water can make the phone's sound slow even though the volume is set optimally. In addition, the sound can sound low, and even worse off. So that the disturbance can be anticipated, do the following method.
How to deal with HP speakers getting into the first water is to turn off the phone and immediately remove the battery and SIM card. If the phone battery is a planting battery, you are advised to dismantle it too. No need to worry because the planting battery can be replaced easily. This removal is done to avoid short circuits.
Try to clean water on the cellphone that can be reached. You are advised to use a soft cloth that absorbs water. Avoid cloth made from polyesters that find it difficult to absorb water. Use the water on the phone slowly. Position the phone with an overturned state for 10 minutes. Gravity will help water out of the phone.
After the water is dry, immediately activate the speaker cleaning feature. How this feature works is that the phone will emit a high tone. It is recommended to tighten the volume so that a vibration on the speaker so that the water or particles that interfere with the speaker will disappear.
If your phone is not equipped with this feature, you can download it on the Playstore or Appstore.
This method is considered traditional but still effective in helping to remove the water on the cellphone. You can hoard your cellphone with dry rice within 12 hours so that the results are maximized. But before doing so, try to cover the holes on your cellphone such as the hole in the headset or hole charger so that rice does not enter.
Like rice, silica gel is useful for absorbing moisture so that it can be used to help absorb water in the cellphone. How to use silica gel to absorb water is to place the cellphone into a box or container, then enter some silica gel. After that, close the box and wait a few hours.
Hot gun can also help the process of evaporation of water that interferes with speakers. Hot Gun is different from hair dryer. The difference is in the heat and the wind that is emitted. Combing cellphones with hair dryers is not recommended because the strong wind that is emitted has the potential to make the water in the cellphone spread to other components. Meanwhile, hot guns that only have small winds are more effective at accelerating evaporation.
This method can be chosen if the water is not too deep into the phone. Dust suction can help water come out more easily, but you still have to be careful doing this method so that water doesn't touch other components of the phone.
Those are some ways to deal with HP speakers getting water. To get other interesting information, visit VOI.ID.
The English, Chinese, Japanese, Arabic, and French versions are automatically generated by the AI. So there may still be inaccuracies in translating, please always see Indonesian as our main language. (system supported by DigitalSiber.id)
