5 Ways To Strengthen Wifi Signals So That Connections Are Not Slow

Illustration of the WiFi signal (Photo: Doc. Pexels)

YOGYAKARTA Have you been vaccinated because of a slow internet connection due to a weak WiFi signal? If you have, you are not alone. To prevent the same incident, you need to know how to strengthen a weak WiFi signal.

One of the factors affecting the weak WiFi signal is the router distance or access point with the device.

Routers are devices that emit WiFi signals. This signal will later be captured by various devices, ranging from smartphones, tablets, laptops to smartwatches.

Each router emits a WiFI signal up to a certain distance. This maximum distance can change depending on the environmental conditions. Well, if the device you are using is too far away, then the WiFi signal emitted by the router will not be able to be captured optimally by the device you are using.

Summarized from various sources, Friday, March 3, 2023, here are how to strengthen the weak WiFi signal:

Adapting Microsoft, one way to strengthen a weak WiFi signal is to keep routers away from objects that interfere with or weaken WiFi signals.

Just so you know, the most common wireless device technology, 802.11g (wireless-G), operates at a frequency of 2.4 gigahertz. Many wireless electronics such as wireless phones, microwave ovens, baby monitors, and garagedoor openings use the same frequency.

This condition can trigger signal interference and can interfere with the connection between your device and router.

To minimize interference, buy wireless phones and other devices that use a 5.8 GHz or 900 megahertz (MHz) frequency. Due to 802.11n (wireless-N) operating at a 2.4 GHz frequency and a more rarely used 5.0 GHz frequency, this higher frequency could cause less network disruption.

The second way to strengthen the weak WiFi signal is to change the router antenna. The router antenna is generally omnidirectional or emits signals in all directions. This makes part of the signal directed to a place that is in vain.

According to Microsoft, users who replace omnidirectional antennas with high gain antennas can direct the desiredrah router wireless signal.

Repeater is a special device that functions to receive and expand the range of WiFi signals.

This device can be placed anywhere that has a stop contact. However, you are advised to place a repeater between the router, modem, or access point and your device.

Router manufacturers often offer firmware updates. Update firmware can sometimes improve the performance of routers. Firmware updates for routers can be done by accessing your router manufacturer sites.

Adapter network vendors also sometimes update the software or drivers Windows uses to connect networks to devices. This update can improve the performance of WiFi signal recipients.

Each router has a maximum reach and bandwidth. Routers who are older generally lose reliable to the latest output product.

Adapted from PcMag, for example, the maximum signal output for wireless-G is 54 Mbps, while Wireless-N (802.11n) reaches 300Mbps. The speed can even be higher if you upgrade to a new router with the latest 802.11ac standard, which yields up to 1Gbps.

This is information about how to strengthen weak WiFi signals. Hopefully this can increase the insight of VOI.ID readers.