7 Causes Of Motorcycle Compression Lost, Here's How To Overcome It

Causes of motorcycle compression are missing (Freepic)

YOGYAKARTA - Compression is one of the main factors that determines the performance of motorcycle engines. But sometimes motor compression is lost due to some conditions. As a vehicle owner, you should know what causes motor compression to disappear and how to deal with it.

Without optimal compression, indoor combustion will not run well. This condition makes the power generated by the engine weak or even the motor unable to be turned on at all.

If the motor compression is lost, the motor performance will drop drastically and can cause various problems in the vehicle. Therefore, let's understand the cause of the compression of the motorbike is lost and how to overcome it in order to be able to drive smoothly and comfortably.

Here are some things that can cause motor compression to disappear:

The piston ring serves to maintain pressure in the fuel room so it doesn't leak. If the piston ring breaks or breaks, the compression pressure will leak into theengkol room.

This condition can cause the loss of engine power. This is usually marked by reduced motorpower and increased consumption of engine oil.

Packing a cylindrical head is in charge of preventing a leak of compression pressure between a cylindrical block and a cylinder head. If there is a leak in this section, the compression pressure can come out and cause the motor to be difficult to turn on or lose power.

Katups that do not close tightly can be the main cause of the loss of compression. This can be due to dirt accumulating on valve mounts, weares, or weakened valve springs. If the valve leaks, the pressure inside the fuel chamber will decrease and cause the engine to be difficult to turn on.

Fluid engine cylinders and pistons can cause compression leaks. Aus cylindrical wall surfaces cannot withstand compression pressure properly, so compressed air and fuel leak into theengkol room.

The cylindrical head gasket serves as a barrier between the engine block and the cylinder head. If this gasket is damaged or torn, then the compression pressure can leak into the cooling system or get out of the engine. Conditions can cause the loss of motor power.

Setting a valve gap that is too loose or too tight can affect the performance of the valve in closing the fuel chamber. If the valve gap doesn't match, the valve won't be able to close perfectly and cause the compression pressure to leak.

Noken as plays a role in regulating valve open-closed timing. If there is damage or wear in this section, the valve can be delayed in closing or not closing tightly. This condition will make the compression pressure disappear.

Here are some ways you can do to overcome the compression of a lost motorbike:

If signs of a piston ring are found or damaged, immediately do a replacement. Usually, the piston ring replacement is also accompanied by checking the engine cylinder to ensure there is no excessive wear.

If the cylinder's head pack is leaking, immediately replace it with a new one. Make sure the installation is done properly so that there is no leakage.

Leaked valves need to be retwisted or if they are too heavily, then they should be replaced with a new one. Also make sure the valve spring is in good condition so that it can work optimally.

If the engine cylinder has severe wear, it is necessary to oversize or enlarge the cylinder size. This condition is usually done by replacing the piston with a larger size to keep it in accordance with the enlarged cylinder.

If the cylinder head gasket is damaged or leaking, it should be replaced immediately with a new one. Make sure the installation is done properly to avoid leakage.

If the problem is caused by an inappropriate valve gap, re-tunt according to the manufacturer's specifications so that the valve can close perfectly.

If fiscality or damage is found to noken as, immediately make repairs or replacements so that the valve open-closed timing returns optimally.

Those are some of the causes of motor compression that are important for you to understand. Doing routine maintenance and checking the condition of the engine components periodically can prevent this problem from happening, so that the motor performance remains optimal. Also read the function of the piston ring.

Stay up to date with the latest domestic and other overseas news on VOI. We present the latest and updated information nationally and internationally.