YOGYAKARTA - How to overcome water seepage on the ceramic floor is fairly easy for those who know how the steps are, but those who don't know, you need to read the article below until it's finished, yes!
Believe me, no one likes to see the floor of their house damaged by water seepage. But don't panic first, for some cases ceramic seepage can be handled in a simple way. But if the problem is too heavy you need to call a professional driver to handle it. But it would be nice if you need to recognize what caused your floor to rembes, here are some of the reasons:
I. Check Channels In Water Pipes
The position of the water pipe that does not appear directly is usually hidden in the ground or walls so that it can become more slick and not messy, and can also secure the pipe from obstacles that can damage it. For this reason, the source of the formation of seepage on the ceramic floor in your house You can be caused by leakage in the drain pipe that seeps into the floor.
Pipes planted on this floor are indeed very risky and there is rapid damage because they often get pressure. If a leak is found, repair it quickly so that the floor seepage does not get worse.
II. Menambal Nat Yang Rusak
To overcome the seepage of water on the ceramic floor, the steps that need to be taken are by checking the condition of the elderly near the affected area. If you find that if the natan is damaged or peels, the action that needs to be taken is to change the damaged natan.
If necessary, eliminate old people as a whole and ensure that the surface is completely dry before implementing it again with new natan. This is important to ensure that the new natan can stick well to the ceramic floor.
III. Ensure No Inundation Of Water
The rembes floor can also be caused by houses that directly border open land or land. Open land can cause a brake floor. For example, if your house is located very close to a garden or field so that it is most likely a seepage can occur.
This situation can get worse if it continues to be left alone, especially in the corner or the concave part that can cause puddles. You must also be on guard because the seepage can get worse. For this reason, we should ensure that there are no puddles around the house.
IV. Wearing Waterproofing
The waterproofing layer is the main protection of water seepage on the bottom of the ceramic floor. If there is a waterproofing layer damaged or aus, quickly repair it by re-implication of the arrangement.
Make sure to cover all zones that are potentially prone to water seepage well.
V. Tinggikan Posisi Lantai
The second suggestion is how to overcome the embes floor, namely by raising the floor position. Floor seepages can occur because the water level is not commensurate with the floor. This can cause water to approach floor ceramics.
With such circumstances, it can make water located in the ground easy to absorb and enter through pores so that in conclusion water can penetrate the floor. For this reason, action is needed to raise the floor surface by approximately 10 to 30 centimeters from before.
If in this rembes problem you are required to replace all ceramics, you really need to know 'How to Calculate the Right Ceramic Needs' so as not to over budget.
So after knowing how to deal with water seepage on the floor, see other interesting news on VOI.ID, it's time to revolutionize news!
The English, Chinese, Japanese, Arabic, and French versions are automatically generated by the AI. So there may still be inaccuracies in translating, please always see Indonesian as our main language. (system supported by DigitalSiber.id)
