Pressure of Ideal Car AC Freon and How to Check it

YOGYAKARTA - The pressure of the car's AC refrigerant is the pressure that occurs in the cooling system (AC). The pressure is generated from the refrigerant gas or freon. Freon is a gas that is able to absorb heat and then cool it. The pressure of the refrigerant in the car AC must be absolutely fit so as not to have a negative impact on the performance of the AC engine. To understand more, see the following article.

The pressure of the AC freon in the car cooling system is very important to be maintained so that the cabin stays cool and the hot air can be absorbed well. In the car air conditioning system there are two types of pressure that must be maintained, namely low freon pressure and high freon pressure.

Low freon pressure occurs inside the car cabin. Freon which was originally in liquid form will turn into gas by absorbing heat from inside the cabin. With low pressure, freon can evaporate more easily while cooling the air inside the cabin.

Meanwhile, high freon pressure occurs on the outside of the car, namely in the condenser. After the fren becomes a gas due to evaporation, the gas must be cooled again until it becomes liquid. This process requires high pressure in the condenser.

Both pressures on this car cooling system must be maintained in proportion. At low car AC freon pressure must be in the range of 15 to 30 psi. While the high pressure figure that must be maintained is in the range of 160 to 250 psi. AC freon pressure on each car can vary depending on many factors.

The pressure of the freon can be in an abnormal range. The trigger can be various things and usually varies in each case. For example, low pressure can be caused by lack of freon, AC system leaks, or clogged filters.

Meanwhile, too high AC pressure can be caused by too much freon, a broken compressor, a blockage in the condenser, to the system experiencing overheating.

It should be noted that the pressure of the freon in the car air conditioner can be problematic for many reasons, for example, there is a leak or damage to the cooling component. To check the pressure, try checking the following things.

When to fill the AC freon is when the compressor does not spin because it can be an indication that the freon needs to be added or filled. In addition, try checking if there is a cold temperature. If there is only a cold, it means that there is damage to your car's cooling system.

Manifold Gauge Set is a tool used to measure the pressure on both sides of the car AC system. You are advised to have a check-up by a professional AC technician to detect whether the freon pressure is really not as it should be or not.

That's the information related to the pressure of the car's AC freon. Visit VOI.id for other interesting information.